Filter By:
- Parts & Accessories (223)
- Wheels (110)
- Hubs (47)
- Rims (38)
- Spokes (14)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 146mm - 1 axle per bag
$1.95 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually
$59.99
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP.
It includes the following:
- Threaded axle spacer M12 x 1.75 Coarse
- M12 x 1.5 Medium
- M12 x 1.0 Fine
- End Cap
$11.50 - $48.00
We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims.
- Teravail Tubeless Tape comes in a variety of widths to fit almost any rim.
- Teravail Tubeless Tape is available in a variety of widths and roll lengths.
- Ten-meter length is enough for a single layer on approximately four wheels
$23.99 - $29.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$17.99 - $20.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.
$9.99
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$69.95
Authentic replacement freehub body for Ritchey V2 Apex and Zeta Phantom Flange road wheels
- 11-speed Shimano
$89.00
Double-wall rims, sealed bearing hubs, stainless steel spokes and premium nipples - all at competitive pricing. These wheels are the new standards in repair staples.
- Shimano hub
- Rim brake use
- Includes Schrader-to-Presta rubber rim grommet
- Includes skewer
$6.18 - $9.79
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$7.99
Replacement freehub spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- 3 hooks for affixing to spokes
$7.99
Replacement freewheel spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- Fits around standard freewheel threads
$4.99
- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches
- Cold forging technology, CrNi stainless steel with rolled threads
- No hub slotting necessary
- 139g (32/265mm)
- Box of 20
- Nipples sold separately
$21.41
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels.
- Double Butted: 2.0/1.8/2.0
- Compatible with straight pull hubs only
- One 264mm spoke = 5.9g
- Nipples sold separately
$31.67
The buyer's choice for wheel builders looking to save weight.
ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond.
- 32 nipples weigh approximately 30 grams
$1.99
- Double butted 2.0/1.5/2.0mm with cold forging technology
- Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches
- 143g @ 32/265mm
- Box of 72
- Nipples sold separately
$129.99
Upgrade or refresh your bike.
GENUINE REPLACEMENT PARTS
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
PRODUCT DETAILS
- Original Equipment replacement Bontrager TLR Disc wheels
- Bontrager Approved double wall, non-eyeletted rims
- Convert to tubeless with TLR rim strip and valve, sold separately
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$9.99 - $15.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40
- Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels
$12.99 - $14.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips
The valves you need to upgrade to Tubeless
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Product details
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Use only with Bontrager TLR rim strip with rectangular base
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Sold as singles
$95.99
Upgrade or refresh your bike.
- Original Equipment replacement Bontrager Connection wheels
- Durable double-wall rim with 20mm internal, 26mm external width
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$73.99 - $124.99
Genuine replacement parts.
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
Details:
- Upgrade or refresh your bike.
- Original equipment replacement Bontrager Connection Disc wheels
- Durable double-wall rim with 20mm internal, 26mm external width
- Does not include a skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$144.99
Upgrade or refresh your bike.
- Original equipment replacement Bontrager Connection Disc wheels
- Durable double-wall rim with 20mm internal, 26mm external width
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$5.99 - $6.99
Upgrade or refresh your Bontrager wheels.
Product details
- Replacement, high-quality rim strips that help prevent flat tires
- Compatible with nearly all common wheels
- Width refers to internal rim dimension
- Not Tubeless Ready
- Sold as singles
$224.99
Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance.
- Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum
- Updated rim design and stronger G609 alloy stands up to hard hits
- Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system
- Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel
- Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear
- 14G spokes with brass locking nipples
- 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately
- Includes TLR rim strip installed and TLR valve
$224.99
The Paradigm Comp Disc Road wheel offers consistent, confident braking and fast-rolling performance. A wider inner rim width delivers better tire support and adds volume, letting you run lower pressure for more traction and a smoother, faster ride. It's updated with a proven Tubeless Ready (TLR) profile for easy tubeless conversion, and interchangeable axles allow for maximum compatibility.
- Wider 21mm inner rim width offers better tire support for added traction and speed
- Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system
- Interchangeable axles allow for compatibility with more frames and forks
- Lightweight, durable alloy rim (26mm outer, 21mm inner width)
- Shimano 10/11spd, SRAM 10/11, Centerlock, additional freehubs available
- Durable, smooth-rolling hubs with lasting performance
- Includes Bontrager TLR rim strip, tube-type rim strip, and TLR valve stem
- No rider weight restrictions
$39.99 - $41.99
These original replacements will get your wheels working like new.
- Alloy thru-axle that can be used with a 6mm hex wrench or with a lever
- Keep it light by removing the lever and instead use a 6mm hex wrench
- Keep it convenient by keeping the lever inside the axle
- Lever is held securely by internal O-ring
- Lever sold separately
$20.99
To be used exclusively with Bontrager Tubeless Ready (TLR) rims.
The rim strips you need to upgrade to Tubeless
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Product details
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Use only with appropriate Bontrager TLR rim valve
- Rim strip replacement is recommended if removed from the wheel
- Sold as singles
- White strip is recommended for carbon rims
- TLR rim valve sold separately
$20.99
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel
- For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service
Page 1 of 15
Next page