Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Giro Sport Recreational Helmet Vent Light
$20.00
The Sport Recreational Helmet Vent Light is one of the easiest and most powerful ways to increase visibility and safety on the road.
Bontrager Helmet Light Bracket
$20.99
Add the safety of visibility to your helmet and light up the trail, road, or commute with help from the Bontrager Helmet Mount. Easily attaches a light to most helmets. - Works with all Bontrager Ion and Flare lights
Bontrager XXX WaveCel Bike Helmet Fit Pad
$17.99
New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager XXX WaveCel helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene
No Image
$11.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon
No Image
$19.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS - ATTACHMENT: Blade or Blade+ helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
No Image
$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: G1 MIPS, G1 - ATTACHMENT: G1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
No Image
$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm
No Image
$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
No Image
$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Z1 MIPS, Z1 - ATTACHMENT: Z1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
No Image
$6.00
Replacement Pads for Lazer's BOB Helmet
No Image
$17.99 - $24.99
A user adjutable cap for the Bullet 2.0 in order to provide airflow or maximize aerodynamics. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet 2.0 helmet - WEIGHT: 34g - MATERIAL: Polycarbonate
No Image
$17.99
A closed cap for the Bullet 2.0 in order to block airflow and maximize aerodynamics. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet vent - WEIGHT: 21g - MATERIAL: Polycarbonate
No Image
$17.99
Venturi technology accelerates the airflow through the helmet. By creating an active air draw at the rear of the helmet, the Venturi cap increases airflow through the Lazer Bullet 2.0. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet 2.0 helmet - WEIGHT: 21g - MATERIAL: Polycarbonate
No Image
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
No Image
$24.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. - COMPATIBILITY: Cameleon MIPS - RECHARGE TIME: 2 hours - RUN TIME: 24 hours - LUMENS: 5.2 lumens - ATTACHMENT: Rear vent - WEIGHT: 19g - MATERIAL: LED light
No Image
$6.99
Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum
No Image
$9.99
Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon
No Image
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
No Image
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
No Image
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Coyote MIPS, Coyote - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
No Image
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer G1 and G1 MIPS helmets. This is the standard padset. Set includes four pads - front pad, two top side pads and one top center pad. - COMPATIBILITY: G1 MIPS, G1 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Jackal
$6.99
Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets
No Image
$6.99
Freshen up the interior of your helmet with a new pad set! - Replacement pads for Sphere helmets - Attachment: Velcro - Material: Foam
No Image
$9.99
Freshen up the interior of your helmet with a new pad set! Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad COMPATIBILITY - Urbanize MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
No Image
$6.99
Screws for Jackal Visor
No Image
$3.99
Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
No Image
$3.99
Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
No Image
$35.00
Strap dividers for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - MATERIAL: Nylon
No Image
$17.99
Change ventilation options with a twist! Choose between aerodynamic performance or up to 11% more ventilation with a rotation of the Twistcap. COMPATIBILITY - Century MIPS - Century - ATTACHMENT: magnetic - WEIGHT: 28g - MATERIAL: Nylon
No Image
$34.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions The Lazer Universal LED mounts directly to any Lazer KinetiCore helmet. It can mount to any other helmet by using the included Velcro strap. COMPATIBILITY - Cityzen KinetiCore - Jackal KinetiCore - Nutz KinetiCore - Pnut KinetiCore - Strada KinetiCore - Vento KinetiCore - BATTERY TYPE: USB rechargeable - RECHARGE TIME: 2.5 hours - RUN TIME: 54 hours - LUMENS: 40 lumens - ATTACHMENT: Direct mount to Lazer KinetiCore helmets. Velcro mount to any helmet. - WEIGHT: 15g
Page 1 of 3 Next page